View of the mount

Rear view

Sketch of the mount

Packaging

The Signal LPA16-444AX E93164 bracket can be used to place a modern ultrathin LCD TV screen (OLED) on the wall. Its load capacity is 30 kg. The wall mount enables the easy adjustment of tilt (without additional tools) in the range of +/-15 degrees. It is also possible to rotate the panel horizontally (+/-80 degrees) and in the plane of the screen (-5...+5 degrees). The TV can be mounted at a distance of 34 to 268 mm from the wall.

The mount cannot be installed on walls that do not provide a firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.

The set contains all components needed for typical installation. In some specific conditions, auxiliary elements or tools may be required. These should be supplied by professionals installing this type of hardware.

The set includes assembly instructions. If you do not understand them, or have any doubts about the safety of the installation, please call a qualified installer.

Before mounting, please check carefully to make sure there are no missing or defective parts. If you have any doubts, do not proceed with the installation.

Improper installation may cause damage or serious injury.

Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for any damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.