Wideband LNB.

+8 dBm optical transmitter with FC/PC optical output.

The included accessories.

The optical kit OTX 1310 KIT is used for installation with fiber optic technology. Using the kit you can create systems that enable transmission of satellite SAT, terrestrial DVB-T2 and FM/DAB radio signals. This technology is distinguished by low attenuation, low interference, and, most importantly, allows to transmit signals over long distances.

The OTX 1310 optical transmitter has an optical output (output power +8 dBm) terminated with FC/PC (Physical Contact) connector and allows for the distribution of the RF/SAT signal through a passive optical network (PON) over the 1310 nm wavelength. The signal is distributed by so called passive optical splitters allowing to distribute it to up to 32 receiving points (TVQ 06 QUATRO A9882 or TVC 06 QUAD A9883 receivers). The exact number of receiving points and their maximum distance from the signal source can be determined by balancing the attenuation of the optical path with the optical power budget.

The optical transmitter is fully resistant to weather conditions (IP65 class) and can be mounted on antenna masts. However, it is recommended to use additional protective covers or boxes.

The power is supplied to the optical transmitter via coaxial cable by the included DC 20V adapter. The satellite converter is supplied with DC 12 V (signal line V).

The components of the kit:

Example of an RF/SAT system based on single-mode optical fiber. The optical transmitter is connected to 2 cables from satellite dish with LNB (Wideband type). The OTX 1310 optical transmitter can distribute the signal to up to 32 TVQ 06 receivers.