Camera IP Hikvision DS-2CD2043G2-I (4 MP, 2,8 mm, 0,005 lx, iluminator 40m, H.265, WDR, AcuSense)

Slot card microSD

Conectorii RJ-45 și cel de alimentare

Accesoriile incluse

Camera dome Hikvision IP DS-2CD2043G2-I, care face parte din seria EasyIP 2.0 Plus, este dotată cu tehnologia AcuSense, cu algoritm de învățare profundă. Datorită acestui fapt, pentru evenimente de detecție, mișcăre și analiză VCA (trecerea liniei virtuale, detectarea intruziunilor) există un filtru care permite clasificarea obiectelor ca om/vehicul și vă permite să ignorați toate celelalte evenimente cauzate de obiecte care nu se încadrează în aceste grupe (ploaie, animale, mișcarea copacilor, cădere frunze etc. ). Dacă filtrul nu este selectat orice detecție de mișcare va declanșa alarma. Modelul descris este dedicat utilizării în sisteme de monitorizare bazate pe DVR-uri IP. Camera este echipată cu senzor CMOS de 1/3 " cu rezoluție de 2 MP și un iluminator IR cu tehnologie EXIR cu distanță de acoperire de max. 30 m pentru a asigura vizibilitate bună în condiții de întuneric total sau parțial. Obiectivul este fix cu distanță focală de 2.8 mm cu un unghi de vizualizare de 103 °. Funcțiile suplimentare pentru îmbunătățirea calității imaginii precum: AGC, 3D-DNR, WDR (120 dB), BLC, HLC și analiza integrată a imaginilor ( VCA ) recunoașterea facială, intrus și detecție trecere linie virtuală, permit instalarea acestora în sisteme avansate de supraveghere video. Carcasa cu protecţie IP67, protejează camera împotriva condițiilor meteorologice adverse. Camera poate fi alimentată la DC 12V sau prin PoE (802.3af).

This camera is part of the EasyIP 2.0 Plus series with AcuSense technology, which is based on Deep Learning algorithms. With AcuSense, the camera is able to classify detected human and vehicle objects and filter out all false alarms (e.g. animals, rain, cobwebs, moving leaves, etc.) with an efficiency up to 98%. This improves the entire monitoring system performance, and the end user only receives information about alarms that meet the criteria. If the filter is not activated for a given event, the camera will detect all objects, as it was the case with previous solutions.

The motion detection has been enhanced with AcuSense technology, allowing events to be filtered for human and vehicle silhouettes. This improves the performance of the entire system and reduces the number of false alarms that reach the user. Once the filter is turned off, detection can continue as before, detecting all objects.

Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.

iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.

Hikvision devices can be operated via mobile phones with Android or iOS using the dedicated Hik-Connect mobile application. It can be used for remote live viewing from DVRs, NVRs, IP cameras, video intercoms over the WiFi, 2G or 3G and to view saved recordings. Operating video intercoms with the application provides also remote opening of the electric strike, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the subscriber. The application supports connectivity over IP and a P2P cloud. Hik-Connect is also the name of the cloud service that provides access to devices in the absence of an external IP address.

Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.

SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.