Balun cu protecție fulger HDT-1F-EXT (UTP)

      Balun cu protecție fulger HDT-1F-EXT (UTP) - 1
      Balun cu protecție fulger HDT-1F-EXT (UTP)
      Cod produs:M17027
      Producător:Ewimar
      • Găsit undeva mai ieftin?Spune-ne
      • SEAP? Publicăm imediat!
      • Instalator sau revanzător?Cere ofertă
      Transport gratuit peste 1000 RON
      Retur gratuit
      Livrare rapidă
      Suport tehnic gratuit
      Video Surge Protector HDO-1F-EXT (BNC)
      View of the device
      HDT-1F-EXT is a high quality balun adapting the impedance of balanced UTP line to the impedance of unbalanced input or output of a CCTV device, combining very efficient surge/overvoltage protection of the connected devices. Thanks to an autotransformer with amorphous core and linear characteristic up to 42 MHz, the device is specially dedicated for CCTV systems transmitting HD video signals (AHD, HD-CVI, HD-TVI), as well as can be used in CVBS systems.
      The EXT (extreme) series uses the latest protection means in the form of superfast automatic fuse made in MOSFET technology. The special fuse has a very low electrical resistance during normal operation. When, due to an overvoltage, the current increases above 100 mA, in a very short time it automatically disconnects the line from the part of the protection circuit connected to the input or output of a CCTV device.
      The built-in surge protection has three segments operating in the right order during lightning or other incidents of surges and voltage spikes of various levels. During normal operation, the video signal circuit is not galvanically connected to the ground, which eliminates harmful ground loops and the related interference.
      An excessive electric charge is discharged to the ground in the initial stage of surge formation (at the rising edge), which lowers the overvoltage to a safe level. In order to discharge the surge current to the ground, the yellow-green wire should be connected straight to a good grounding system. Secondary overvoltages are eliminated by a separate circuit decoupled by a unique solution with the ultra-fast MOSFET fuse and transient voltage suppressor. This results in high durability and efficiency of the device, also in the case of multiple pulses.
      The idea of the protection system
      Very low capacitance of the protection circuits (4 pF) has a minimal effect on the video signal transmission within 0~100 MHz frequency range, which is especially important in the case of the broadband AHD, HD-CVI and HD-TVI signals
      In order to ensure full protection, it is recommended to use the surge protectors and good grounding on two ends of the video transmission line. The application of HDT-1F-EXT device on one side will effectively protect only the neighboring device.
      Example of a very effective protection of an HD camera and a receiver (monitor, DVR etc.)
      connected via UTP line with the use of two HDT-1F-EXT M17027 devices

      Example of effective protection of an HD camera and a receiver (monitor, DVR etc.)
      connected via UTP line with the use of HDT-1F-EXT M17027 and HDT-1F-PRO M17012 devices

      Specifications
      NameHDT-1F EXT
      CodeM17027
      Input (line)Screw connection, removable
      terminal block
      Output (device)Cable terminated with BNC-m
      Bandwidth42 MHz
      Attenuation0.2 dB
      Overvoltage suppressorsAir spark gap, gas discharge tube, Transil™, MOSFET fuse
      Line to ground protectionGas discharge tube: 90 V, 2x10 kA @ 8/20 μS
      Wire to wire protectionTransient voltage suppressor: 6 V, 100 A @ 8/20 μS
      Maximum level of overvoltage4 kV
      Transmission range (1080p)
       250 m
      Capacitance of the protection circuits4 pF
      Operating temperature range-40˚C...+60˚C
      Dimensions82 x 24 x 31 mm (excluding the cable)
      Ewimar
      M17027
      Balun cu protecție fulger HDT-1F-EXT (UTP) - 1

      Balun cu protecție fulger HDT-1F-EXT (UTP)

      Cerere ofertă instalator

      Cerere ofertă pentru firme instalatoare

      -+
      SEAP

      Completați formularul de mai jos cu produsele dorite pentru publicare în SEAP și revenim cât mai rapid cu un răspuns