RACK board ZMD-35 - panou de montaj frontal EURO TH35 430 mm

Șină DIN ZMD-35 R77335 EURO TH35 cu lungimea de 430 mm încastrată cu 100 mm de partea din față a dulapului RA... Vezi mai mult
      RACK board ZMD-35 - panou de montaj frontal EURO TH35 430 mm - 1
      RACK board ZMD-35 - panou de montaj frontal EURO TH35 430 mm
      Cod produs:R77335
      Producător:RACKboard
      • Găsit undeva mai ieftin?Spune-ne
      • SEAP? Publicăm imediat!
      • Instalator sau revanzător?Cere ofertă
      8601 lei
      Livrare în 1-2 zile
      Ultimele produse în stoc
      Transport gratuit peste 1000 RON
      Retur gratuit
      Livrare rapidă
      Suport tehnic gratuit
      RACK board ZMD-35 - Front Assembly Component EURO TH35 430 mm
      View of the ZMD-35 component of the RACK board system
      RACK board ZMD-35 - Front Assembly Component EURO TH35 430 mm
      The included M6 screws with washers and caged nuts

      RACK board allows installers to make use both of the front and side surfaces of 19" RACK cabinets, which are accessible after dismantling the side walls. The solution enables unprecedented volume filling factor of the cabinets, while maintaining good access to all signal distribution devices, with proper ventilation, connection transparency, application of patch panels to connect all inbound and outbound cables. All the features make it easy for technicians to diagnose the network during operation.
      Detailed information on the RACK board vertical mounting system is available here.
      To mount the ZMB panels, it is necessary to use the ZMC front panels. The width of the ZMC panel is specially designed to enable the application of the ZMB panels on the side surfaces of the rack cabinet.
      The ZMD-35 R77335 component is a EURO TH35 rail with length of 430 mm recessed by 100 mm from the front of the RACK cabinet. The component is made of hard PA11 aluminum sheet with thickness of 2 mm. The ZMD-35 can be loaded with evenly distributed devices with a total weight of 12 kg. The set includes four screws with caged nuts used to assemble the elements in the cabinet.
      Example application of the RACK board front assembly component
      The ZMD-35 R77335 component is used for installing devices on EURO TH35 rail in a RACK cabinet. Some examples of the devices:
      TERRA channel amplifiers, transmodulators, channel converters, thermostats etc.
      NameRACK board
      ZMD-35
      CodeR77335
      Mounting carrier
      EURO TH35 430 mm
      Materialaluminum PA11
      Main carrier dimensions483 x 43 x 100 mm
      Thickness
      2.0 mm
      Main carrier height1 U
      ColorRAL 9004
      Cabinet standard
      19''
      Weight0.3 kg
      Main features of the RACK board vertical mounting system:
      • Predefined installation sets for individual equipment configurations enable simple and quick assembly.
      • RACK board mounting panels allow for installing the equipment items and cables so that the components are placed in a clear and aesthetic way. The highly professional solution ensures that the longer cables are hidden in the middle part of the cabinet, whereas the connections and the devices are easily available (in opposite to placing such devices horizontally). This improves the equipment cooling and facilitates measurement and adjustment procedures.
      • The RACK board system is a universal solution - originally dedicated for Terra equipment, it can be easily adopted for use in GSM (repeaters), network (routers and switches) and other applications.
      • Because every device in the RACK board system is placed vertically and it does not adhere to any other device or element of the RACK cabinet, it is naturally cooled by the air circulation inside the cabinet.
      • Each device has its own mounting panel and the spaces between devices allow for easy wiring.
      • Hardware components of RACK board system:
        • ZMB series - side assembly components for installing on the side surfaces of large standing cabinets. Currently, we offer panels for mounting in 800 x 600 cabinets.
        • ZMC series - front assembly components that can be installed together with ZMB panels.
        • ZMD series - front assembly components for hanging or standing cabinets (cannot be used with ZMB series due to 19'' width).
      • With the RACK board system the installer can make use not only of the front of a RACK cabinet (rails with 19" spacing) but also of the side spaces - the access to those devices is obtained by dismantling side walls of the RACK. The ZMB side assembly is mounted (on the left and/or right side) to the front and rear RACK rail. Currently we offer the ZMB-1-800 assembly for 600x800 mm standing RACK cabinets.
      • The installer can use ZMC front-mount assemblies in several versions. They allow for installing in the front part of the cabinet both the 19’’ standard devices but also other equipment mounted on the EURO TH35 rail or on vertical planes.
      • The elements of the RACK board system are mounted to RACK rails with the included M6 screws and caged nuts.
      • The elements of the RACK board system are made of hard aluminum sheets PA11 (DIN, ISO: AlMg3), powder painted in RAL9004 color. If the prepared mounting holes do not fit the mounted equipment, it is easy to drill new ones.
      • The ZMD components can be used in standing or hanging cabinets, but they cannot be used together with ZMB components that take the whole 19" width.
      • The cables providing signals from antennas are connected to the patch panel with F connectors which, via bridges, transmits the signals to a next patch panel and the required devices. By taking the connection bridges, the installer/technician can measure the input signal in any path.
      • All outbound cables are also connected to panels with F connectors. Each connector can be marked with the number of the corresponding apartment, which helps to perform diagnostics of the whole distribution network, beginning with the measurements of the output signals.
      RACKboard
      R77335

      produse în această categorie

      RACK board ZMD-35 - panou de montaj frontal EURO TH35 430 mm - 1

      RACK board ZMD-35 - panou de montaj frontal EURO TH35 430 mm

      8601 lei
      Cerere ofertă instalator

      Cerere ofertă pentru firme instalatoare

      -+
      Livrare în 1-2 zile
      Cerere ofertă instalator

      Cerere ofertă pentru firme instalatoare

      -+
      SEAP

      Completați formularul de mai jos cu produsele dorite pentru publicare în SEAP și revenim cât mai rapid cu un răspuns